CentOS sensors软件监控主板CPU数据

系统 Linux
在Linux下有个叫CentOS sensors的软件可以帮助我们来监控主板,CPU的工作电压,风扇转速、温度等数据。这些数据我们通常在主板的 BIOS也可以看到。当我们可以在机器运行的时候通过CentOS sensors随时来监测着CPU的温度变化,可以预防呵保护因为CPU过热而会烧掉。

xx对于电脑使用的玩家的常用软件,然后我就学习及深入的研究xx,在这里和大家一起探讨xx的使用方法,希望对大家有用。用MRTG监测Linux系统CPU温度

在Linux下有个叫CentOS sensors的软件可以帮助我们来监控主板,CPU的工作电压,风扇转速、温度等数据。这些数据我们通常在主板的 BIOS也可以看到。当我们可以在机器运行的时候通过CentOS sensors随时来监测着CPU的温度变化,可以预防呵保护因为CPU过热而会烧掉。

1. 安装CentOS sensors现在基本上每个Linux都已经有CentOS sensors包了,我们主要安装了就可以了。或者我们也可以通过源文件来自己编译。1)在FC,RH, CENTOS下,用rpm:[root@securitycn ~]# rpm -ivh lm_sensors-2.10.0-3.1.i386.rpm3)编译源文件安装我们可以通过:这里下载源文件这里我们要注意的问题是要先安装libsysfs库,是Sysfsutils,Sysfsutils-devel软件

  1. tar xzvf lm-sensors-xxx.tar.gz  
  2. make user  
  3. make user_install testing 

下面我们就用一些简单的命令来利用CentOS sensors来得到CPU的数据。我们要用root的身份来:sensors-detect,然后它会自动搜索主板上的chipset和相应的driver,我们全部答YES就可以了[root@securitycn ~]# sensors-detect

  1. # sensors-detect revision 1.413 (2006/01/19 20:28:00)  
  2. This program will help you determine which I2C/SMBus modules you need to  
  3. load to use lm_sensors most effectively. You need to have i2c and  
  4. lm_sensors installed before running this program.  
  5. Also, you need to be `root', or at least have access to the /dev/i2c-*  
  6. files, for most things.  
  7. If you have patched your kernel and have some drivers built in, you can  
  8. safely answer NO if asked to load some modules. In this case, things may  
  9. seem a bit confusing, but they will still work.  
  10.  
  11. It is generally safe and recommended to accept the default answers to all  
  12. questions, unless you know what you're doing.  
  13.  
  14. We can start with probing for (PCI) I2C or SMBus adapters.  
  15. You do not need any special privileges for this.  
  16. Do you want to probe now? (YES/no):   

全部默认YES即可。然后我们启动CentOS sensors:

  1. /etc/init.d/lm_sensors start  
  2. Starting lm_sensors: [ OK ] 

我们可以通过lsmod来确定我们需要的driver已经加载了没有

  1. lsmod | grep i2c  
  2. i2c_isa 9153 2 w83627hf,w83781d  
  3. i2c_i801 11341 0   
  4. i2c_dev 12613 0   
  5. i2c_ec 9025 1 sbs  
  6. i2c_core 23745 6 w83627hf,w83781d,i2c_isa,i2c_i801,i2c_dev,i2c_ec 

然后我们用CentOS sensors的命令就可以了:

  1. [root@securitycn ~]# sensors  
  2. w83627hf-isa-0290  
  3. Adapter: ISA adapter  
  4. VCore 1: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM   
  5. VCore 2: +3.36 V (min = +0.00 V, max = +0.00 V) ALARM   
  6. +3.3V: +0.93 V (min = +3.14 V, max = +3.46 V) ALARM   
  7. +5V: +5.11 V (min = +4.73 V, max = +5.24 V)   
  8. +12V: +4.56 V (min = +10.82 V, max = +13.19 V) ALARM   
  9. -12V: -7.10 V (min = -13.18 V, max = -10.88 V) ALARM   
  10. -5V: -1.93 V (min = -5.25 V, max = -4.75 V) ALARM   
  11. V5SB: +5.51 V (min = +4.73 V, max = +5.24 V) ALARM   
  12. VBat: +0.02 V (min = +2.40 V, max = +3.60 V) ALARM   
  13. fan1: 0 RPM (min = 2732 RPM, div = 2) ALARM   
  14. fan2: 0 RPM (min = 0 RPM, div = 2)   
  15. fan3: 0 RPM (min = 0 RPM, div = 2)   
  16. temp1: +38癈 (high = +50癈, hyst = +45癈) sensor = thermistor   
  17. temp2: +33.5癈 (high = +80癈, hyst = +75癈) sensor = thermistor   
  18. temp3: +33.5癈 (high = +80癈, hyst = +75癈) sensor = thermistor   
  19. vid: +0.000 V (VRM Version 10.0)  
  20. alarms:   
  21. beep_enable:  
  22. Sound alarm enabled 

这里我们可以看到温度还没有相对应CPU,我们主要稍微修改一下/etc/sensors.conf就可以了,不过其实都不用我们自己去动手,一般我们都可以从主板生产商那里下载到配置文件。通过CentOS sensors我们就可以得到主板温度,CPU电压,风扇转速这些信息。我们可以根据这些数据来监察系统的运行情况来预防系统的问题。

接下来让它和MRTG整合在一起吧

  1. [root@securitycn ~]# cd /usr/local/mrtg/bin  
  2. [root@securitycn ~]# vi temp.sh  
  3. #内容如下  
  4. #!/bin/bash  
  5. cputemp=`/usr/bin/sensors | grep temp1 |awk '{print $2}'|cut -c 2-4` #这句是说找出有temp1那一行,印出第二个列的2-4个字  
  6. systemp =`/usr/bin/sensors | grep temp2 |awk '{print $2}'|cut -c 2-5` 不用解释了吧  
  7. echo $cputemp  
  8. echo $systemp  
  9. # the uptime  
  10. uptime | sed 's:^.* up \(.*\), [0-9][0-9]* users.*$:\1:'  
  11. # my name  
  12. uname -n 
  1. [root@securitycn ~]# chmod +x temp.sh 改成可执行  
  2. [root@securitycn ~]# ./temp.sh 试试看有没有问题  
  3. 39  
  4. 33.5  
  5. 15:36:19 up 22:28, 1 user, load average: 0.04, 0.09, 0.04  
  6. securitycn 

CentOS sensors再来写下面的文件

  1. [root@securitycn ~]# cd ../etc/  
  2. [root@securitycn ~]# vi temp.cfg  
  1. WorkDir: /data1/usr/apache/htdocs/mrtg/temp/  
  2. Target[index]: `/usr/local/mrtg/bin/temp.sh`  
  3. MaxBytes[index]:80  
  4. Options[index]: gauge, nopercent, growright  
  5. YLegend[index]: Temp (度)  
  6. ShortLegend[index]: 度  
  7. LegendO[index]: 系统温度;  
  8. LegendI[index]: CPU温度;  
  9. Title[index]: 系统温度表  
  10. PageTop[index]: <H1>主机温度表</H1> 

[root@securitycn ~]# /usr/local/mrtg/bin/mrtg /usr/local/mrtg/etc/temp.cfg执行3次就不报错了然后加入到crontab里面*/5 * * * * /usr/local/mrtg/bin/mrtg /usr/local/mrtg/etc/temp.cfgPageTop[index]: <H1>主机温度表

【编辑推荐】

  1. CentOS FastCGI***化性能挥其性能优势
  2. CentOS RoR应用性能优化的实战经验
  3. CentOS WEB缓存服务器程序使用比较灵活
  4. CentOS Oracle测试运行使用root用户修改
  5. CentOS NTFS安装和配置支持所有符合POSIX标准的磁盘操作
责任编辑:佚名 来源: csdn
相关推荐

2023-08-28 06:56:16

主板CPU攒机

2020-11-25 08:13:33

CPU主板GPU

2022-03-02 00:06:36

数据勒索软件恶意软件

2011-04-15 09:47:10

CentOSCPU

2010-04-06 09:22:23

CentOS系统

2011-03-31 09:02:22

MRTG监控CPU

2011-03-31 11:14:29

MRTG监测

2022-06-20 05:18:29

服务器CPU

2011-10-10 10:15:54

英特尔主板CPU

2009-09-18 13:28:41

Mobile Sens

2011-09-06 10:23:33

2010-05-26 18:08:30

Linux性能监控

2011-03-24 10:19:58

SQL Server2CPU性能监控

2010-12-24 13:25:44

Linux性能监控CPU

2019-06-03 20:00:09

LinuxCPU温度GPU温度

2021-03-01 18:33:26

CPU内存主板

2011-04-01 15:50:55

ZABBIX监控

2010-01-14 17:23:29

CentOS Orac

2011-03-30 10:07:05

Zabbix监控

2013-04-24 15:25:05

CentOStop命令CPU负载
点赞
收藏

51CTO技术栈公众号